How To Paint Bathroom Cabinets Perfectly & Quickly - Easy Steps 2021
Last updated: 12 April, 2021
Have you ever tried to paint your bathroom cabinets by yourself? Painting the bathroom vanity and cabinets is not difficult and can impart a fresh look to the overall surroundings.
- Step 1: Removal of the Doors
- Step 2: Identify the Painting Location
- Step 3: Clean the surface
- Step 4: Sanding
- Step 5: Priming
- Step 6: Start Painting
- Step 7: Sanding and Reinstallation
The steps involve choosing the perfect tool and place, removing hardware, sanding, priming, and painting. Although time taking, it is worth the try.
Thus, this article brings you a step-by-step guide to paint the bathroom cabinets by yourself without hiring professionals to perform the task.
How to Paint Bathroom Cabinets - Detailed Guide
Step 1: Removal of the Doors
The first step involves the removal of all the doors and drawers from the built-in cabinet. For this purpose, you need to loosen the screws and binding materials attached to the object.
This can be done with the help of a screwdriver. Make sure to name all the doors and drawers. So that apparatus could be reinserted the way it was before.
Step 2: Identify the Painting Location
After all the doors have been separated from the frame, it is time to look for a place to work. Mostly, users prefer basements and other isolated places to get the job done. There are two advantages of such locations. Firstly, they can work with concentration as there is no one to disturb them. Secondly, it is to prevent the paint spots inside the house while painting.
However, these areas are dark and might not be good for your eyesight. Thus, it is recommended to look for spaces with natural light to paint the drawers and doors. It is also advised to put a cloth on the floor and table before beginning to work. This will prevent the paint drops from falling on the floor in case of negligence.
Step 3: Clean the surface
The third step in the guide focuses on cleaning all the objects and surfaces before painting them. This is very useful and must be carried out even if you feel that the tools are clean. A good cleaning will smoothen the surface of the apparatus and will give it a good finish.
Mostly, alcohol or acetone is recommended for this purpose as it will remove all the impurities from the desired surface.
But you can also choose some natural alternatives such as baking soda or various oils for cleaning. Afterward, use a clean damp cloth to finish the work. Remember to wear gloves, a mask, and goggles for protection.
Step 4: Sanding
The next step involves the filling of holes and cracks in the unit, followed by sanding. The cracks and holes can be filled up with the help of filler. Apply filler where required and spread it with the help of a putty knife. Afterward, remove the excess filter and sand the hardware. Sanding by hand is mostly preferred with the help of fine-grit sandpaper.
After sanding, add another layer of filler where required and repeat the process. After sanding twice, you will observe that the surface has now become smooth. Later on, use the vacuum cleaner to suck away all the sand and wipe the surface with a wet cloth. You can also use a liquid deglosser on glossy surfaces for better results. This paves the way for the next step, which is priming.
Step 5: Priming
After sanding, the next step is priming. It is essential to look for the right brush and tools for priming the cabinets. Using the wrong and cheap tools might affect the overall result and lead to a devastating outcome. It is highly recommended to purchase tools manufactured by Purdy. These products have a reputation of being the best and performance efficient items available in the market.
Firstly, brush the primer on non-flat areas of the doors. Then, with the help of a roller, apply the primer to the rest of the equipment. You can also use the roller on the areas where the brush is used. But, it is advised to wait before the previous coating gets dried. After the hardware has been done, you should also prime the frame of the cabinet.
Step 6: Start Painting
Finally, it is time to paint the apparatus. Before painting, make sure to sand the primed surface. Follow the process mentioned in step 4 to sand the material. Then, start painting using the roller. It is advised to paint the back and edges first and wait for them to dry. Turn them around and use the roller and brush alternatively to paint the rest of the object.
You can choose both warm and cool color tones for painting. However, if the bathroom is already small, it is better to use light colors and cool tones to make it look spacious. After you are done with the doors and drawers, remember to paint the frame as well.
Step 7: Sanding and Reinstallation
After painting the tools lightly sand the painted materials and repeat the process with a second coat of paint. Keep adding the layers of paint till you are satisfied, and let them dry for a day or two.
Then, reinstall the doors and drawers back to their original position and screw them together. Congratulations, you have successfully painted your bathroom cabinet by yourself
What kind of paint should use for bathroom cabinets?
Is It Necessary to sand bathroom cabinets before painting?
Do I need to prime the cabinets before painting?
Painting the bathroom cabinet by yourself can be an interesting task which offers pleasure and relaxation at the same time. The job does not require a lot of effort and can be performed even without expert guidance.
Moreover, it adds a new touch to your bathroom surroundings and improves your mood as well. However, it is important to choose the right tool and color for an outstanding outcome. Thus, these minor factors should not be neglected. Last but not least, have fun painting your cabinets.